Street Stock Chassis Setup, Handling, and Driving Thoughts
Bill of Material for my CRUSA SS Engine Build
SBC Block (Race Machined and Prepped) 1000 Rotating Assembly (Mahle Pistons, 6" H Beams, 4340 Crank) 1900 2-Bolt Main Stud Kit (ARP #101RMS) 80 Fuel Pump (Pro-Cam 9350-1, 6 Valve,...
Bill of Material for my CRUSA SS Engine Build
SBC Block (Race Machined and Prepped) 1000 Rotating Assembly (Mahle Pistons, 6" H Beams, 4340 Crank) 1900 2-Bolt Main Stud Kit (ARP #101RMS) 80 Fuel Pump (Pro-Cam 9350-1, 6 Valve,...
Tire Pressure Ranges I have had success with
These pressures are shown in pounds per inch and I typically stay within these ranges on these tires for 3000-3200lb cars. . .
Tire Pressure Ranges I have had success with
These pressures are shown in pounds per inch and I typically stay within these ranges on these tires for 3000-3200lb cars. . .
Racing Plans for the 2023 Season
Our plans are for her 1st run to be a test and tune session at Camden Speedway, Camden TN on March 18th. There are two primary tracks I believe will...
Racing Plans for the 2023 Season
Our plans are for her 1st run to be a test and tune session at Camden Speedway, Camden TN on March 18th. There are two primary tracks I believe will...
Setup Thoughts Starting Out, Rachel's Camaro, 2...
I am setting the front-end springs with the right front spring firmer than the left for two primary reasons starting out. I am not running any significant rebound in the left front...
Setup Thoughts Starting Out, Rachel's Camaro, 2...
I am setting the front-end springs with the right front spring firmer than the left for two primary reasons starting out. I am not running any significant rebound in the left front...
Street Stock Set-up, Leaf Spring (Prior to 2022)
This is the setup I was running on my camaro before I built my new coil car. We are trying new things now but make no mistake this setup won...
Street Stock Set-up, Leaf Spring (Prior to 2022)
This is the setup I was running on my camaro before I built my new coil car. We are trying new things now but make no mistake this setup won...